Do you have a collection of sea glass or beachcombing treasures that you would love to turn into something personal? Would you like to know how to transform your beach finds into a beautiful piece of 3D framed artwork? In this tutorial, I’ll show you how!
This post contains affiliate links. I may earn a small commission at no extra cost to you, so thank you for supporting my blog and helping me keep these free tutorials coming!
This summer, we took a family holiday to Seatown Beach, Dorset, along the beautiful Jurassic Coast in the UK and had a fantastic time fossil and sea glass hunting!

We are a family of beachcombers, and this is our favourite activity whenever we visit a beach. You definitely won’t find us relaxing! Instead, we’ll be searching, digging and looking at the ground, hunting for sea glass and other beachcombing treasures.
This time, we found such a wonderful collection of sea glass, fossils, interesting stones, driftwood and shells that I wanted to turn them into a piece of art to remember our amazing holiday.
For this particular design I’ve used a variety of beachcombing finds, you can use all the materials I’ve suggested or just a selection of them. I’ll walk you through how I created my picture, but feel free to make your own version.
*I’ve used two different types of glue for this project and I will explain why.
Epoxy glue provides a strong bond, making it ideal for attaching larger heavier items such as stones, fossils and driftwood. However, some epoxy adhesives can yellow over time, particularly when exposed to UV light. For this reason, I preferred to use epoxy for large items only and in areas where the glue would not be visible.
E6000 Plus dries clear and remains slightly flexible once cured. It is also UV-resistant, making it a good choice for the sea glass and smaller pieces where some of the glue might be visible and wont need the full strength of an epoxy glue.
Safety Note* Make sure to follow the adhesive manufacturer’s instructions, work in a well-ventilated area and keep uncured adhesives away from children.
If you’re ready to get stuck into making your own beachcomber art, here’s what you’ll need:

Materials
- Beachcomber finds: sea glass, stones, fossils, shells, driftwood
- Deep box frame
- 1.4mm white mount board
- Double sided sticky tape
- E6000 Plus glue
- Epoxy glue
Tools
- Cutting mat
- Cutting knife
- Safety ruler
- Pencil
- Craft tweezers
- Scissors
- Small glue stick
- Thin glue sitck
- Soft paint brush
Step 1. Collect Your Beachcombing Finds
Head to your chosen beach when the tide is going out, ideally approaching low tide, to look for your beachcombing treasures.
Try to collect a variety of interesting shapes, colours and textures. The more variety you have, the more possibilities you’ll have when creating your artwork! For my coastal landscape, I used:
- Sea glass to create the sea.
- Driftwood to create the beach.
- Thin pieces of driftwood to create the birds.
- Fossils and interesting beach stones to create the shoreline.
- Larger, jagged stones to create the cliffs.
Here are our family’s beachcombing finds from this trip:


Safety note* Always check the tide timetables and how fast the tide comes in before beachcombing, ensuring you can reach dry ground before the tide comes in. Keep a safe distance from unstable cliffs and follow local collecting rules. Fossils should be collected responsibly from loose beach material rather than dug out of cliff faces.
Step 2: Clean Your Beachcombing Finds
Sea glass can be gently washed in water. For the fossils, beach stones and driftwood, use a soft paintbrush to remove any loose sand or dirt. Allow everything to dry completely before applying any glue. I prefer to keep the natural look and I don’t treat my items with anything.
Step 3: Find Your Deep Box Frame
Box frames come in different shapes and sizes but ensure to get a deep box frame with enough room for your design. I’ve bought many frames from Hobbycraft in the UK (they will get used!) and decided to use the 8 x 8-inch white magnetic hinge box frame shown on the left hand side of the picture below.

You don’t always need a hinged box frame, you can absolutely use the standard deep box frame, but when I was looking around my local Hobbycraft shop I found that this was the deepest option available so I preferred that.

Step 4. Cut Your Mount Board
For this project, I used 1.4mm white mount board, which provided a sturdy base for arranging my beachcombing finds. I wouldn’t recommend ordinary card as you need a firm, flat base for the artwork.
Measure the backing board of your box frame and cut your mount board to fit inside. Mark your measurements with a pencil and ruler. For my artwork I measured a 20.5 x 20.5cm piece of mount board to cut out, which was the same size as the backing board.

Using a cutting knife, cutting mat and safety ruler cut out your mount board. You will have to go over with the cutting knife multiple times to get a clean edge, but it’s worth taking your time, as scissors can distort the mount board.

Step 5. Prepare Your Mount Board
If you’re using a hinged box frame like mine, I recommend placing a temporary piece of ribbon or string underneath the mount board. This will allow you to lift it out easily without having to pick it up by the edges, which becomes particularly useful once the artwork starts getting heavier.
You can create your artwork entirely outside the frame, but I preferred to start arranging the larger items with the mount board sitting inside the frame. This helped me check that everything fitted within the available space.
I also found it useful to close the hinged lid every so often to check that none of the stones or fossils were too tall.

If you’re using a traditional box frame, remember to leave a small amount of space around the edges of your artwork so that it fits inside the inner spacer frame. You can temporarily position the inner spacer frame over your artwork to check that everything fits comfortably within the available space.
Use a ruler to check the height of your arrangement, ensuring that even your tallest stones and fossils will fit within the available depth of the frame.
Step 6. Create the Seashore and Cliffs
Take note of the depth you have within the frame, for this picture I had a depth of 1.8cm to play with.
Start by playing around with your items, place them down, take a picture to refer back to. Take all the time needed here to try your ideas, before committing to glue! I started with the larger rocks and fossils to create the cliffs on the left hand side of my picture. I then arranged the driftwood to make the main body of the seashore.

When you are ready, use Epoxy glue for the large heavy stones and large pieces of drift wood only. Ensure the glue will not be seen as mentioned before the Epoxy may yellow with time, but it is a very strong glue and will provide the strength needed for the main framework of the art. I found it best to use the small glue stick (that came with the glue) to transfer the glue to the items.
I then used the smaller items and fossils to fill in the remaining gaps of the seashore and to create the shoreline. Use the E6000 Plus glue for these smaller items with a small/thin glue stick. Try to not let the glue be seen but that’s easier said than done!
Wait for the glue to cure before moving onto the next step, this may be 24-72 hours depending on the glue.

Step 7. Make the Sea Glass Sea
Now that the seashore and cliff are fully stuck down, you can play with the sea glass to make the sea. Most of the sea glass we collected was green, so I arranged the darker greens towards the top to represent the deeper sea further out. I then gradually introduced lighter greens and white sea glass towards the shoreline to create the appearance of breaking waves.
I found craft tweezers particularly useful for picking up and positioning the smaller pieces of sea glass. Once you are happy with your placement, use the E6000 Plus glue to attach your sea glass to the mount board. You can use a thin glue stick to transfer the glue to the small pieces or dip them lightly in the glue with your tweezers.

Step 8. Make the Driftwood Birds
The sky was looking a little bare, so I decided to add three tiny birds using some of the finest pieces of driftwood from our collection. To make these birds carefully trim the driftwood into small pieces using scissors and shape them into birds with the craft tweezers. To make them look like they are flying, ensure to position them at different angles.
Glue in place with a very small amount of E6000 plus glue. Wait 24-72 hours for the glue to cure

Step 9. Mount Your Beachcomber Art
Make sure your artwork is positioned the correct way up before attaching it permanently! Consider the hinges at the back of the backing board or box frame.
Use strong double sided sticky tape on the backing board of the box frame around the edge and in the middle. Once you are ready place your finished beachcomber art onto the box frame backing board and press gently to secure in place.
If you’re using a traditional box frame, assemble your artwork outside the frame before carefully fitting the completed backing board into place.


Conclusion
Close your box frame, and that’s it! Your beachcomber art is now complete! You can add a description somewhere of the location of the beach finds. I prefer to do this on the back to not distract from the art. Or I may print a sticker off for the bottom of the frame at a later point.
I hope you enjoy your results and hang your art somewhere proudly to enjoy. Our beachcomber art is now hanging in our living room, as my two boys said they wanted to look at it every day! 🙂

More Beachcomber Art Ideas to Try
During another family holiday we collected some beautiful sea glass and seashells. I used these to create a simple circular design with our beachcomber finds. I started this one by glueing four pieces of sea glass 2.5cm away from the edge top, bottom, left and right.
Then I filled the inside and ensured to glue sea glass in a curve around the edge by eye. I used the E6000 Plus glue and as it does not dry straight away, you can adjust the outside curve slightly until you are happy it is circular.

There are so many different pictures you could create with your beachcombing finds, from sea glass family figures and ocean creatures to crashing waves and museum style fossil displays. Do give them a try, I know I will after our next coastal holiday.
Love this idea? Save it for later on Pinterest!

I’d love to see what you create, so please share this post, leave a comment with your results, or get in touch via my contact form if you have any questions.
Happy beachcomber art making!
Want more free craft tutorials? Subscribe to Craft with Mei below to be the first to see my latest projects.




Leave a Reply